HOTWAY HUR5-SU3 2 BAY RAID USB 3.0 + CASE
By incorporating the latest SuperSpeed USB 10Gbps (USB 3.1 Gen 2) technology, the PROBOX HUR6-SU31 is able to deliver up to twice the speed of the USB 3.1 Gen 1 and the older USB 3.0 connection, which runs at only 5Gbps. At the same time, the device is still backwards compatible with the widely used USB 3.0 and even USB 2.0 technology.
- Description
- Brand
- SPECIFICATIONS
Description
with RAID 0/ RAID1, Single and JBOD functions
-
- Support RAID 0/1, JBOD and Single mode.
- Supports SATA I / SATA II / SATA III HDD
- Slot-in design for easy HDD installation or removal.
- Support Single SATA HDD capacity up to 8TB*
- Maximum capacity up to 16TB* with 2 HDDs under RAID 0 or JBOD mode
- Smart RAID switcher support for fast and easy RAID mode setting.
- Smart Power sync supports PC, MAC
(Device will hibernate automatically in 10 seconds after PC shuts down)
*(OS must support GPT to use value over 2TB)
10 Times Faster
The full-duplex data transfers capability allows the sending and receiving of data (at the same time) at 10 times faster than an equivalent card of USB 2.0 Standard. The maximum speed of USB 3.0 is 5Gbps, which enables the data transfer up to 25GB within a minute.
HDD X 2 (Supported)
All 2 HDDs are recognized when they are installed.
Native 4KN Hard Drive is Not Supported.
(8TB x2 * refer to Compatibility List)
POWER SYNC
Powers off in synchronizatin with PC.
Single Mode
Non-RAID: (Single Mode) Computer will show up as two independent drives.
This function can be used if RAID is not required, if one HDD is installed or
two different brands or capacities of HDD are installed.
JBOD MODE
RAID 0 – Spanning: Two HDDs will show up as one large single drive.
Spanning is an array (not RAID) that is written sequentially across two drives.
RAID 0 MODE
RAID 0 – Striping: Two HDDs will show up as one large single drive but speed
performance will boost up. The two HDDs will write Data in “column” effect.
This form of array splits each piece of Data across both HDDs in segments.
Data are store between first HDD and second HDD. While the HDD is stripe in writing,
the next head of next HDD is move to next track to write. The Data is writing without
any form of data-checking. Once one HDD is damaged and all data can be lost.
RAID 1 MIRRORING MODE
RAID 1– Mirroring: Using this mode will require 2 identical HDDs; meaning they must
be the same capacity, brand and model number. Under RAID1, it will create an extra
copy (or mirror) set of data to second drive. The backup data are more important for
safe keeping and the available data only show up in one large single drive. This is useful
when first HDD fails and it can be replaced by second set of identical data instantly.
Brand
HOTWAY PROBOX
Specifications